AM30S

A 3-inch architectural linear luminaire with configurable direct and indirect light. Choose the shielding, output and control options for your suspended or surface-mounted lighting layout.

76 mm wide · 91 mm housing height
Direct or direct / indirect illumination
2, 3, 4 and 8 ft · continuous runs
0–10 V or DALI · dimming to 1%
Flush, pop-down or drop lens options

Request a quote

Model	AM30S / AM 3.0 LED
Housing section	W76 × H91 mm (2.99 × 3.58 in)
Lens-dependent overall height	Flush: 91 mm; pop down: 98.94 mm; drop: 116.61 mm
Length	2 ft / 3 ft / 4 ft / 8 ft; continuous runs
Mounting	60 in cable suspension / surface mount
Finish	White / black / custom RAL
Direct shielding	Frosted diffuser; microprismatic; asymmetric; batwing; 0.3 in pop-down; 1 in drop
Indirect shielding	Batwing / asymmetric / no indirect
Nominal direct output	500 / 750 / 1000 / 1250 lm/ft
Nominal indirect output	500 / 750 / 1000 / 1200 lm/ft
Field-selectable output	FS option: 100% / 80% / 60% of the selected maximum output
Color temperature	2700 K / 3000 K / 3500 K / 4000 K; optional 4-CCT field selection
Color rendering	Ra 80 / Ra 90
Circuits	1 circuit / 2 circuits for independent direct and indirect control
Control & dimming	0–10 V, 1% dimming / DALI, 1% dimming
Input voltage	120–277 VAC

Shape the light.
Above and below.

Select the direct shielding for the space below, then add batwing or asymmetric indirect light when your layout calls for ceiling illumination.

Direct light

AM30S Frosted diffuser distribution — FDFrosted diffuser

AM30S Microprismatic lens distribution — MPMicroprismatic lens

AM30S Asymmetric lens distribution — ASAsymmetric lens

AM30S Batwing lens distribution — BWBatwing lens

AM30S 0.3 in pop-down lens distribution — PD0.3 in pop-down lens

AM30S 1 in drop lens distribution — DL11 in drop lens

Indirect light

AM30S Indirect batwing distribution — BWIndirect batwing

AM30S Indirect asymmetric distribution — ASIndirect asymmetric

UN

No indirect

Specify direct-only lighting when an upward light component is not required.

Three lens appearances.
One linear form.

Flush lens

A flush light aperture for a clean, integrated profile.

Pop-down lens

A 0.3 in lens option extending below the housing.

Drop lens

A 1 in drop lens option for a deeper luminous edge.

Configure the output.
Fine-tune the space.

Choose nominal direct and indirect output separately. The optional FS setting lets you select 100%, 80% or 60% of that maximum output in the field.

Four color temperatures

2700 K, 3000 K, 3500 K or 4000 K, with a 4-CCT selectable option. Specify Ra 80 or Ra 90.

Independent control

Choose one circuit, or two circuits to control the direct and indirect sources independently. 0–10 V and DALI options dim to 1%.

Fit the installation

Choose 60 in cable suspension or surface mounting, standard lengths or continuous runs, and white, black or a custom RAL finish.

Linear light. In everyday spaces.

Application concepts for workspaces, meeting rooms and shared interiors.

Workspaces

Linear lighting above open-plan desks.

Meeting rooms

Focused illumination with soft ceiling light.

Learning & shared spaces

Continuous lines of light for reading and gathering.

AI-generated application concepts.

Bring your AM30S product brief to Felix

Share the run length, direct and indirect output, shielding, control method and required quantities.

Discuss your configuration